- Warm
Electronics: 1/2/06 –
12/31/09
- Design
and Prototype: 1/2/06 – 6/30/08
Goal: Have ~10 boards useful
for test stands with ability to trigger and save events to standard CDMS
file format, with data useful for analysis.
i.
V1 design, building and testing: 1/2/06 – 1/8/08
ii.
V2 design, order 2-4 circuit boards: 11/1/07 – 1/8/08
Expect to be close to final version
iii.
V2 assembly and initial testing of 2 boards: 1/8/08 – 2/8/08
iv.
V2 order and assembly of 8 boards: 2/8/08 – 6/30/08
v.
V2 testing with test-stands: 2/8/08 – 9/30/08
- Design
and prototyping of final version:
4/1/08 – 12/31/08
- Design
production testing process:
4/1/08 – 12/31/08
i.
Develop checklist to certify board
ii.
Design and produce jig for testing and DAC calibrations
- Production
and testing of full set of cards:
1/1/09 – 12/31/09
- Design
and produce QET Isolator boards:
9/1/08 – 3/31/09
- Design
and produce FEDUP boards:
9/1/08 – 6/31/09
- DAQ: 1/2/06 – 12/31/10
- Specifications: 7/02/07 – 1/31/08
- Specifications
for monitoring: 1/31/08 –
2/31/08
- Development
of basic Labview control:
1/1/07 – 2/8/08
- Select
and implement version control for labview Vis: 1/8/08 – 3/31/08
- Development
of DAQ for test facilities:
1/8/08 – 6/30/08
i.
Incorporate DCRC control into ZIPFEBmodular Vis
ii.
Incorporate DCRC control into DarkScript and LightEvent
iii.
Interface DCRC to CDMS data file format.
iv.
Implement global trigger and readout for multiple
detectors
- Design
final version for experiment:
7/1/08 – 12/31/08
- Design
monitoring system for experiment:
7/1/08 – 12/31/08
- Develop
version for systems test:
1/1/09 – 6/1/09
- Develop
final version for experiment:
6/1/09 – 12/31/10